Setting up your Handout Manager Device for the First Time

When you first receive your Handout Manager device, use the following steps to secure it with a Personal Identification Number (PIN), connect to the Wi-Fi and then register to Pharmacy Manager.

1. Remove the device from its packaging and press and hold the Power button on the right-hand side until the Android logo displays.

2. A start up sequence takes approximately 45-60 seconds until the Device not compliant screen displays.

   

   Select Set screen lock.

3. The Choose a screen lock screen displays, select PIN.

4. On the Set a PIN screen, enter a PIN for the device, it must be a minimum of 6 digits.

   Note - Common PIN codes are not be permitted, for example, 123456.

5. Select Next.

6. The Re-enter your PIN screen displays, enter your PIN and then select Confirm.

7. Verify the device connects to the Wi-Fi.

   Note - If the device does not connect to the Wi-Fi speak to your Cegedim Rx representative.
   If you have not yet set up your Zyxel Wi-Fi unit, see Zyxel Wi-Fi Installation for details.

8. The desktop displays, select Handout Manager.

9. The Welcome - This device isn't registered screen displays.

   

You can now register the device with Pharmacy Manager. See Handout Manager Settings for details.