Multiple flavours

 

> Dispensary tab

 

A similar process outlined in Multiple items is also used to handle prescriptions for multiple flavours, ensuring stock depletes correctly for each flavour.

  • Start to dispense the item as you would normally e.g. select the patient and number of items.

  • Select the Written As generic, choosing a Dispensed asitem for which you have stock.

  • Entering the full prescribed quantity and press to confirm.

  • Type in the appropriate dosage and direction codes/text.

  • Before printing the labels, and whilst the cursor is still within the Directions box, press & & .

  • The Select multiple items window appears.

  • Click the up pointing arrow to increase the number of items from one to four.

  • Three additional levels open.

Each level is distinctly numbered , etc. The system can accommodate what would be considered as an unrealistic maximum of 15 levels.

  • The initial selection populates the first level Dispensed as i.e. Banana

  • Adjust the dispensed quantity to reflect the amount of this flavour i.e. 6P (packs) of Banana.

  • Press and the highlight moves to the next level.

Alternative brand choice

  • Enter the second part of the quantity i.e. 6P

  • Repeat the process for the remaining flavours.

  • Click the OK button to confirm your selections to print the label(s) as specified.

Labels will print according to the way you input the dispensed quantity. If you input 2P & 1P for two quantities, a total of three labels will appear, whereas if you input 3600 & 1800, two labels will appear reflecting those quantities.

  • Check Combine to one label if you do not want separate labels for each make.

If you are applying the labels to two separate original packs, you would not want to combine to one label. However, if you were putting all the tablets or capsules into a single bottle, or all blister strips into a single carton, you would want to combine the two quantities to a single label.

 

The Select generic and Select pack size buttons exist as part of the general functionality of multiple item dispensing. In practice, it is unlikely they would be used in a typical multiple flavours scenario. However, they can be used if the situation arises. If required, an explanation of their application can be found in Multiple items.

Other options

  • Check Different directions if you want to append the different dosage and directions at this point (as opposed to reverting back to the Dispensary tab).

  • Owing balances can be entered for one or both makes if applicable. These balances will appear automatically if you are keeping stock whilst labelling.

  • Click the Remove all button to remove all work to date in order to restart.

  • Click the Remove button to clear the highlighted entry i.e. the second level in the above illustration.

If you enter different directions but then subsequently select Combine to one label, the different directions will be ignored in favour of those entered on the Dispensary tab.

Owing balances

In the event that one or more of the additional flavours being dispensed is out of stock, the balance to be owed will appear in the Owe box.

If automatic stock control is not activated, it is up to you to enter the amount owed.

  • Click the OK button to confirm your selections to print the label(s) as specified. An owings label is produced.

See Dispensing owing balances.

Updated 16th March 2010